BARBARA is a rectangular lit mirror with ambinet light. Smooth shapes of the LED stripe. Classic and elegant design for contemporary baths, bedrooms and dressings.
The outer LED is protected of humidity and dust, by a plastic strip with a high dispersion degree which permit to generate an uniform ambient light on the wall. The edge of the mirror is sandblasted, obtaining a matte, semi-transparent strip, which amplifies the dispersion of ambient light. This mirror model creates a warm and harmonious atmosphere.
When you place an order, indicate the height and width you need. For standard sizes, you have the option for height up to 1100 mm and maximum width up to 1400 mm *( other dimensions must be discussed).
The whole construction has 25 mm, the glass itself is 4 mm. So you will have a minimum space between the mirror and the wall. The plastic carcase hides any technical detail, guaranteeing the safety of the entire system, protecting it from humidity, dust and children's access. There is an aluminum-fixing bar behind, to secure the mirror to the wall**. The connection cable is centered in the backside. The mirror is equipped with a mechanical turn on/off switch.
!!! Because this model has ambient light, installation of the mechanical switch or motion sensor is not possible. We recommend that you opt for the touch button or you must provide a wall turn on/off switch for this kind of mirror.
You can also choose one or more additional options for your mirror:
Mounting and connection
The mirror has been designed to facilitate its installation as much as possible.
1. Set the height according to the dimensions of the mirror and the space where it will be mount.
2. Measure the size of the fixing bar and mark the distance required to fix the bolts to the wall. Make sure they are on the straight horizontal line.
3. Fix the dowels and screws to the wall. They come in set with the mirror.
4. Hang the mirror on the screws.
5. Connect the power cord to the mains. The mirror cable has a connection plug.
*Attention! In case you need a mirror with dimensions exceeding the standard sizes, please contact us! We can make mirrors that exceed those indicated.
** Attention! The fixing bar is installed horizontally as it is shown in the picture. If you intend to mount the mirror differently than its design implies, please contact us. We will install the fixing bar in the required position.
*** Attention! When you turned on the LED light, there is a delay of 1-3 seconds. This gap is normal for LED technology, and is designed to protect the built-in power supply from overloading.
Please keep this in mind, especially when connecting mirrors with touch buttons. Wait a few seconds for the light to turn on, avoid repeated touch.