OTILIA  oval mirror with polished edge. This simple model is ideal for bathrooms, living rooms, halls, bedrooms.

It can be completed with a defog system or decorative lighting on the wall, becoming more practical and stylish.

O’VIRRO mirrors:

• Custom Dimensions
• Long Life LED Technology
• A++
• Ultra Slim
• 3 Years Warranty
• Ecological
• High quality, efficient lighting (900 lumens / m)

Available sizes:

When you place an order, indicate the height and width you need. For standard sizes, you have the option for height up to 1100 mm and maximum width up to 1400 mm *( other dimensions must be discussed).

Technical specifications

The whole construction has 25 mm, the glass itself is 4 mm. So you will have a minimum space between the mirror and the wall. The plastic carcase hides any technical detail, guaranteeing the safety of the entire system, protecting it from humidity, dust and children's access. There is an aluminum-fixing bar behind, to secure the mirror to the wall**. The connection cable is centered in the backside. The mirror is equipped with a mechanical turn on/off switch.

Additional options:

You can also choose one or more additional options for your mirror:

• Connection system *** -by default, this model has a mechanical switch, positioned on the left, side. If need you can opt for the touch button, double touch button or motion sensor. The double touch button is recommended to be installed when you also opt for defog system.
• Defog System - prevents condensation on the surface of the mirror, when there is a high degree of humidity in the bathroom. Heating, 45-70% of surface, depending of the model and size. 
• Additional Back Light - can be installed UP / DOWN or LEFT / RIGHT side of the frame, as additional decoration. Choose the desired position.
• The light Color – basically, all our model has a light of 6000K (neutral), but you can choose 4000K light (warm).
• Stainless Steel Frame - is a decorative element, which replaces the side of the carcase behind the mirror.

!!! The installation of the stainless steel frame does not allow the installation of the mechanical button, the motion sensor and the additional lighting.

Mounting and connection

The design of the mirror facilitates its installation as much as possible.

Mounting steps:

1. Set the height according to the dimensions of the mirror and the space where it will be mount.

2. Measure the size of the fixing bar and mark the distance required to fix the bolts to the wall. Make sure they are on the straight horizontal line.

3. Fix the dowels and screws to the wall. They come in set with the mirror.

4. Hang the mirror on the screws.

5. Connect the power cord to the mains. The mirror cable has a connection plug.

*Attention! In case you need a mirror with dimensions exceeding the standard sizes, please contact us! We can make mirrors that exceed those indicated.

** Attention! The fixing bar is installed horizontally as it is shown in the picture.  If you intend to mount the mirror differently than its design implies, please contact us. We will install the fixing bar in the required position.

*** Attention! When you turned on the LED light, there is a delay of 1-3 seconds. This gap is normal for LED technology, and is designed to protect the built-in power supply from overloading.

Please keep this in mind, especially when connecting mirrors with touch buttons. Wait a few seconds for the light to turn on, avoid repeated touch.